Cabinet Opening Desktop Chime Set

Product Overview

A stepped sensing body meets a thin magnet to form a smooth sloping relationship when closed. The short wedge receiver angles its grille forward and places three buttons on top.

This unbranded concept is intended for everyday local opening-event notifications. It is not a camera doorbell or a remote security system.

Key Features

• Stepped sensor layout: Unequal component heights define the closed composition.
• Desktop notification: Place the receiver near a verified supply.
• Top physical buttons: Volume and cue selection are development goals.
• Not a locking device: The product does not prevent a cabinet from opening.

Set Contents

One magnetic sensor pair and one USB-powered desktop receiver. Batteries, adhesive pads, screws, USB cables, and power adapters are not assumed to be included unless confirmed in the final package specification.

Everyday Placement

Household supply cabinets and studio document cabinets. Choose positions using actual site tests rather than an assumed wireless distance.

Proposed Specifications

• Product: Cabinet Opening Desktop Chime Set
• Housing: Proposed ABS/PC with design-specific buttons, diffusers, or textile components.
• Trigger: Opening event when the sensing body and magnet separate; closing cues and continuous status are not assumed.
• Power direction: USB-powered desktop receiver; input and sensor battery requirements to be confirmed.
• Wireless: Local wireless; frequency, protocol, pairing capacity, range, and wall penetration remain unverified.
• Notification: Features described above are development goals; chime count, volume, latency, light behavior, and setting memory require testing.
• Dimensions and weight: To be measured on approved samples.

Installation and Use

1. Confirm the final power and battery requirements and pair components according to the supplied instructions.
2. Check hinge clearance and closed spacing, then test repeated opening without component collision.
3. Check mounting-surface suitability, moving-part clearance, and receiver power access before attaching anything.
4. Align the sensor pair with the opening closed, then test repeated opening and reset behavior.
5. Retest after final installation, battery changes, or receiver relocation.

Care and Maintenance

Clean with a dry soft cloth. Follow the final instructions for disconnecting power before maintenance. Do not allow liquid into openings or dismantle a mains-powered receiver. Adults should manage batteries, small magnets, and mounting parts. Stop use if components are damaged, loose, or unusually hot.

Frequently Asked Questions

Does it require Wi-Fi or an app?
The concept uses local wireless. Wi-Fi, accounts, remote notifications, video, recording, and cloud storage are not included.

Will it work across several walls or floors?
No universal range is promised. Building materials, interference, and placement must be tested at the intended location.

Will it work during a power loss?
Do not assume operation without the required supply. Backup power and low-battery alerts are not included unless validated.

Can the magnetic parts be mounted with any gap?
Maximum separation and alignment tolerance must be measured. Test the actual closed position before mounting.

Important Development Information

This listing describes a proposed product concept, not tested production hardware. Specifications, electrical safety, radio requirements, pairing behavior, environmental suitability, and all performance claims must be verified before sale. No waterproof rating, guaranteed delivery of alerts, theft prevention, life-safety protection, worldwide uniqueness, or patent-clearance claim is made. Final images and component counts must match the approved set.