Offset Mount Sliding Door Chime Set

Product Overview

One long and one short rounded sensor strip work with stepped mounting spacers. The receiver has a low shallow oval body, recessed sound openings, and a short upper rim.

This unbranded concept is intended for everyday local opening-event notifications. It is not a camera doorbell or a remote security system.

Key Features

• Two spacer directions: Proposed thicknesses accommodate limited mounting offsets.
• Long and short sensor parts: The component roles stay visually distinct.
• Sliding-path checks: All parts must remain outside the moving panel path.
• Recessed receiver grille: A short upper rim creates a shadow line.

Set Contents

One magnetic sensor pair, two spacer pads of different proposed thicknesses, and one indoor plug-in receiver. Batteries, adhesive pads, screws, USB cables, and power adapters are not assumed to be included unless confirmed in the final package specification.

Everyday Placement

Compatible sliding doors and frames with limited surface offsets. Choose positions using actual site tests rather than an assumed wireless distance.

Proposed Specifications

• Product: Offset Mount Sliding Door Chime Set
• Housing: Proposed ABS/PC with design-specific buttons, diffusers, or textile components.
• Trigger: Opening event when the sensing body and magnet separate; closing cues and continuous status are not assumed.
• Power direction: Indoor plug-in receiver; sensor battery and spacer thicknesses to be confirmed.
• Wireless: Local wireless; frequency, protocol, pairing capacity, range, and wall penetration remain unverified.
• Notification: Features described above are development goals; chime count, volume, latency, light behavior, and setting memory require testing.
• Dimensions and weight: To be measured on approved samples.

Installation and Use

1. Confirm the final power and battery requirements and pair components according to the supplied instructions.
2. Hold the parts with the proposed spacers and test the full opening travel before mounting. Do not attach parts inside a sliding track.
3. Check mounting-surface suitability, moving-part clearance, and receiver power access before attaching anything.
4. Align the sensor pair with the opening closed, then test repeated opening and reset behavior.
5. Retest after final installation, battery changes, or receiver relocation.

Care and Maintenance

Clean with a dry soft cloth. Follow the final instructions for disconnecting power before maintenance. Do not allow liquid into openings or dismantle a mains-powered receiver. Adults should manage batteries, small magnets, and mounting parts. Stop use if components are damaged, loose, or unusually hot.

Frequently Asked Questions

Does it require Wi-Fi or an app?
The concept uses local wireless. Wi-Fi, accounts, remote notifications, video, recording, and cloud storage are not included.

Will it work across several walls or floors?
No universal range is promised. Building materials, interference, and placement must be tested at the intended location.

Will it work during a power loss?
Do not assume operation without the required supply. Backup power and low-battery alerts are not included unless validated.

Can the magnetic parts be mounted with any gap?
Maximum separation and alignment tolerance must be measured. Test the actual closed position before mounting.

Important Development Information

This listing describes a proposed product concept, not tested production hardware. Specifications, electrical safety, radio requirements, pairing behavior, environmental suitability, and all performance claims must be verified before sale. No waterproof rating, guaranteed delivery of alerts, theft prevention, life-safety protection, worldwide uniqueness, or patent-clearance claim is made. Final images and component counts must match the approved set.